Heavy-duty Flextral PE10 Petro-Flex petroleum suction and discharge hose — the trade-standard for tank truck and in-plant fuel transfer. Stocked at our Long Beach warehouse in 2", 3", and 4" diameters with aluminum Dixon cam-lock end fittings — same product the refinery contractors, hazmat crews, and vacuum truck operators across Southern California specify by name. Rated to 150 PSI max working pressure and full vacuum, for gasoline, diesel, kerosene, ethanol, oil, and other petroleum products with up to 50% aromatic content.
Local pickup at our Long Beach warehouse. Call (562) 620-5797 for same-day quote. Hours: M–F 7:30 AM – 4 PM.
Sizes & Lengths
| Size (ID) | OD | Length | Fittings | Flextral MPN |
|---|---|---|---|---|
| 2" | 2.50" | 20–25′ | Aluminum female + male cam-lock | PE10-200CEX020-AL |
| 3" | 3.56" | 20–25′ | Aluminum female + male cam-lock | PE10-300CEX020-AL |
| 4" | 4.60" | 20–25′ | Aluminum female + male cam-lock | PE10-400CEX020-AL |
Custom lengths and 1"–1½", 2½", 6", and 8" diameters available — call for quote.
Specifications (Flextral PE10 Series)
| Property | Spec |
|---|---|
| Tube | Black nitrile (NBR), ARPM Class A+ |
| Reinforcement | Synthetic yarn with steel spiral wire helix |
| Cover | Black corrugated synthetic rubber — oil, fuel, weather, and ozone resistant |
| Max working pressure | 150 PSI (all sizes) |
| Vacuum rating | Full vacuum |
| Bend radius | 5.0" (2") / 8.0" (3") / 12.5" (4") |
| Weight | 1.10 lb/ft (2") / 1.98 lb/ft (3") / 2.76 lb/ft (4") |
| Temperature range | −40 °F to +180 °F |
| Aromatic content | Up to 50% |
| Jacket branding | FLEXTRAL PE10-[size] PETRO-FLEX 150 PSI MAX WP |
| Cam-lock material | USA-stamped Dixon aluminum |
| Static dissipation | Static wire — must be properly grounded during fabrication |
Applications
- Tank truck loading and offloading — gasoline, diesel, kerosene
- In-plant petroleum transfer
- Vacuum truck pickup of fuel, oil, and contaminated liquids
- Hydraulic suction and return lines
- Fats, grease, animal and vegetable oils
- Refinery and terminal hose-down stations
Used across Southern California by refinery service contractors, hazmat response teams, marine fuel handlers, fleet fueling, and vacuum truck operators.
Compatible Fittings (Also In Stock)
We stock the Dixon aluminum cam-lock fittings that mate with these assemblies:
- Type A, B, D, DD, AA — sizes 2", 3", 4", 6"
- Reducers 4"×3", 6"×4", 3"×2" (with and without bleeder)
- Cam × male NPT / cam × female NPT / male × hose shank / female × hose shank
- 2"/3"/4"/6" cam-lock gaskets
- 19" and 30" cam-lock retention straps
Frequently Asked Questions
Is this hose rated for gasoline and diesel?
Yes. The Flextral PE10 is rated for petroleum-based products with aromatic content up to 50% — including gasoline, diesel, kerosene, jet fuel, ethanol blends, fuel oils, and crude. The nitrile (NBR) tube is ARPM Class A+, the industry gold standard for hydrocarbon resistance.
What length comes standard?
We stock 20′ and 25′ assemblies in 2", 3", and 4" with cam-lock ends. Other lengths (10′, 50′, 100′ bulk) and other fittings (NPT, flange) are available on request — call for a same-day quote.
Is it a suction-and-discharge hose or discharge-only?
Both. The PE10 is a full suction-and-discharge hose with an embedded steel helix for vacuum support. Rated full vacuum — it works on a vacuum truck pulling fuel out of a tank as cleanly as it discharges into one.
What’s the max working pressure?
150 PSI across all sizes. Burst pressure is 4× working pressure per ARPM standard. Well above the 50–75 PSI typical loading-rack operating range.
Are the cam-lock fittings made in the USA?
Yes. Aluminum Dixon cam-locks on every assembly — Type C (female × hose shank) and Type E (male × hose shank) crimped with permanent sleeves. You can see the "USA" cast into the lever housing.
What temperatures can this handle?
−40 °F to +180 °F. Cold-weather refinery work and hot ambient Long Beach summer conditions are both inside the rated range.
Do I need to ground it?
Yes. Every PE10 assembly has a static-dissipation wire that must be properly grounded during fabrication and tested for continuity. We bond and test every assembly we sell. If you source the hose without our crimped fittings, request the static-continuity certificate.
Can you crimp a custom assembly?
Yes. Bring in or describe the application (length, end-fitting types, intended fluid, working pressure), and we crimp on-site. Most custom assemblies ship same- or next-day from our Long Beach warehouse.






